Install Mech-Q according to your ACAD version.
Start ACAD and make sure that command prompt
is activated (Ctrl-9)
Choose option Mech-Q -> Maintenance ->
-> Authorize Mech-Q and write down the Serial.
Execute:
APPLOAD -> Mech-Q v4 Keygen.fas -> MQKEY
Input above mentioned Serial Number. Press
enter. Activation Key will be generated. Write
it also down.
Choose option Mech-Q -> Maintenance ->
-> Authorize Mech-Q again, fill reg data and
input also Activation Key. Press Apply Key
button.
In doubt? Read this guide:
https://www.asvic.com.au/index.php?com=com_content&itemid=46
=======
wwww.downloadly.ir